Zyxel LTE7490-M904,LTE B1/3/5/7/8/20/28/38/40/41,WCDMA B1/3/5/8, Standard,EU/UK Plug,FCS, support CA B1+B3/7

Popis produktu:

Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router supports Cat. 18 and perfect for the operators who are looking for 4G LTE FWA solutions to deliver ultra-fast and high-capacity premium broadband services with deployment flexibility.

Lightning-fast internet connectivity
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router employs 3GPP UE downlink Category 18 – the top-level LTE technology with downlink data rates of up to 1.2 Gbps through 12 spatial streams on three component carriers.

Built-in 4x4 MIMO high-gain antenna
The Zyxel LTE7490-M904 4G LTE-A Pro Outdoor Router provides 4x4 MIMO high-gain antennas of up to 7 dBi per element that work effectively in outdoor environments. The outdoor design enables it to work under near non-line-of-sight conditions to increase coverage and bandwidth as well as to eliminate edge corners having difficulty accessing good signals.

Strengthen your competitive edge with Fixed Wireless Access (FWA)
Deploying LTE7490-M904 as part of FWA allows you to extend your 4G service coverage into subscribers’ homes and workplaces without extra wire infrastructure. This secures the TCOs and increases business revenue by supporting a larger number of subscribers with a premium fixed-grade connection.

Non-stop connectivity with LTE 2nd WAN for failover
The wireless LTE allows you to take advantage of the 2nd WAN without a cabling plan. As long as the gateway supports "Dual-WAN Failover", you can just connect Zyxel LTE7490-M904 to the existing gateway and set LTE as the failover WAN and relieve the risk of network outage.

IP networking

Supports IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
Supports ICMP
Virtual Private Network (VPN) passthrough
Supports NAT/NAPT
Supports NAT DMZ
Supports port forwarding/triggering
Supports ALG
Routing

Supports router mode
Supports bridge (IP pass-through) mode
Supports dynamic DNS for first APN
Supports remote management under bridge mode
IP firewall

Firewall can be enabled or disabled via GUI
DoS attack prevention
Supports SPI
Application-level firewall
Filters LAN MAC addresses
Filters URLs
Management

Supports local/remote device management and firmware upgrade via TR-069, HTTP/web GUI and FTP
APN management
Account management
PIN/PUK management
Network selection
Operating frequency band selection
CLI/SSH (local and remote SSH access)
Supports UPnP IGD
Supports SSH with key access certification management
Supports bandwidth/quota management
Supports mobile apps (iOS and Android) for easy installation and local management only
Supports remote throughput testing by TR-143
WiFi Protected Setup (WPS)
Hidden SSID

LTE interface

Standard-compliant: 3GPP UE DL Category 18, UL Category 13
Supports LTE bands: B1/B3/B5/B7/B8/B20/B28/38/40/41
Supports DL transmission mode TM1/2/3/4/6/7/8/9
LTE antennas: 4 embedded directional antennas of up to 7 dBi/element (4x4 MIMO)
Supports DL 5xCA**, 2x2 MIMO
Supports DL 3xCA, 4x4 MIMO, B1/3/7**
Supports DL modulations QPSK, 16-QAM, 64-QAM and 256-QAM
Supports UL modulations QPSK, 16-QAM and 64-QAM
Supports UL 2xCA** intra-band, B3/7/38/40/41
Peak data rates:
DL: 1.2 Gbps within 100 MHz bandwidth
UL: 150 Mbps within 40 MHz bandwidth
UMTS Air interface

Standard-compliant: WCDMA bands 1/3/5/8
Supported frequencies:
HSPA+/UMTS: 2100/1800/900/850 MHz (bands 1/3/5/8)
WCDMA: 2100/1800/900/850 MHz
HSPA+ downlink data rates up to 42 Mbps
HSUPA uplink data rates up to 5.76 Mbps
WiFi Air interface***

Wireless standards: 802.11 b/g/n, 2.4 GHz, 300 Mbps
Wireless omni antennas:
WiFi 2.4 GHz: 2x2 internal antennas up to 3 dBi
Hardware Interface

One Gigabit RJ-45 PoE LAN port
One LED indicator for:
Power status
Internet status
LTE signal strength
WiFi status
LAN status
One WiFi on/off button
One 3FF micro SIM card socket
One reset to default button
Power specifications

Standard 802.3af/at Power over Ethernet (PoE)
Power consumption at PoE < 16 W

Power consumption
16 watt (peak)

Physical specifications
Item dimensions (WxDxH): 254 x 255 x 58 mm (9.99” x 10.03” x 2.28”)
Item weight: 1100 g (2.43 lb.)
Package dimensions (WxDxH): 280 x 402 x 108 mm (11.02” x 15.83” x 4.25”)
Package weight: 2520 g (5.55 lb.)

Environmental specifications
Ingress Protection rating

IP68 harden for outdoor environments
Lightning protection

K.21 enhanced mode, 6 kV
Operating environment

Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity: 5% to 95% (non-condensing)
Storage environment

Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% (non-condensing)

Certification
CE
WEEE (Waste Electrical and Electronic Equipment) Directive certification
RoHS (Restriction of Hazardous Substances) Directive certification
HSF (Hazardous Substance Free)
European Parliament and Council Directive 94/62/EC of 20 December 1994 on packaging and packaging waste

Package contents
Standard 802.3af/at Power of Ethernet (PoE) injector
1.8 m Ethernet cable yellow 8P8C
Power cord
PG19 thread (cable gland)
Quick Start Guide
Warranty card
DoC and safety warning
Wall/pole mounting kit
Wire grounding kit

Stránky o produkte:

https://www.zyxel.com/cz/cs/products_services/4G-LTE-A-Pro-Outdoor-Router-LTE7490-M904/